This is a lightweight documentation intended to get operators started with setting up the Nodepool service. For more insight on what Nodepool can do, please refer to its upstream documentation.
The nodepool service is installed with the rh-python35 software collections:
- The configuration is located in /etc/nodepool
- The logs are written to /var/log/nodepool
- The services are prefixed with rh-python35-
A convenient wrapper for the command line is installed in /usr/bin/nodepool.
The nodepool-launcher component is required in the architecture file to enable nodepool.
This minimal deployment uses an OpenStack cloud provider, where images available to build test nodes will be managed through the OpenStack cloud itself, for example with Glance.
To use the RunC container driver, add the hypervisor-runc component to the architecture file or check the RunC manual setup below.
To manage custom images through the config repository, built using diskimage-builder (DIB), add the nodepool-builder component in the architecture file.
With diskimage-builder, Software Factory users can customize test images without the need for specific authorizations on the OpenStack project. And since custom images definitions are subject to reviews on the config repository, operators can choose to allow or reject these images.
Add a cloud provider¶
To add a cloud provider, an OpenStack cloud account is required. It is highly recommended to use a project dedicated to Nodepool.
The slave instances inherit the project’s “default” security group for access rules. Therefore the project’s “default” security group must allow incoming SSH traffic (TCP/22) and incoming log stream port (TCP/19885) from the zuul-executor node. Please refer to OpenStack’s documentation to find out how to modify security groups.
In order to configure an OpenStack provider you need to add in sfconfig.yaml the cloud client information, below is an example of configuration.
nodepool: providers: - name: default auth_url: http://localhost:5000/v2.0 project_id: 'tenantname' username: 'user' password: 'secret' image_format: raw region_name: '' # Uncomment and set domain-related values when using a keystone v3 authentication endpoint # user_domain_name: Default # project_domain_name: Default
To apply the configuration you need to run again the sfconfig script.
You should be able to validate the configuration via the nodepool client by checking if Nodepool is able to authenticate on the cloud account.
$ nodepool list $ nodepool image-list
See the Nodepool user documentation for configuring additional settings on the providers as well as defining labels and diskimages.
As an administrator, it can be really useful to check /var/log/nodepool to debug the Nodepool configuration.
Add a container provider¶
Software Factory’s Nodepool service comes with a new RunC (OpenContainer) driver based on a simple runc implementation. It is still under review and not integrated in the upstream version of Nodepool yet, however it is available in Software Factory to enable a lightweight environment for Zuul jobs, instead of full-fledged OpenStack instances.
The driver will start containerized sshd processes using a TCP port in a range from 22022 to 65535. Make sure the RunC provider host accepts incoming traffic on these ports from the zuul-executor.
Setup an RunC provider using the hypervisor-runc role¶
The role hypervisor-runc can be added to the architecture file. This role will install the requirements and configure the node. This role must be installed on a Centos 7 instance. Containers bind mount the local host’s filesystem, that means you don’t have to configure an image, what is installed on the instance is available inside the containers. The role can be defined on multiple nodes in order to scale.
Please refer to Extending the architecture for adding a node to the architecture, then run sfconfig.
The RunC provider doesn’t enforce network isolation and slaves need to run on a dedicated instance/network. sfconfig will refuse to install this role on a server where Software Factory services are running. Nevertheless you can bypass this protection by using the sfconfig’s option –enable-insecure-slaves.
Note that config/nodepool/_local_hypervisor_runc.yaml will by automatically updated in the config repository, making RunC provider(s) available in Nodepool.
Manual setup of an RunC container provider¶
Alternatively, you can setup a container provider manually using one or more dedicated server(s), which could be running Fedora, CentOS, RHEL or any other Linux distribution:
- Create a new user, for example: useradd -m zuul-worker
- Authorize nodepool to connect as root: copy the /var/lib/nodepool/.ssh/id_rsa.pub to /root/.ssh/authorized_keys
- Authorize zuul to connect to the new user: copy the /var/lib/zuul/.ssh/id_rsa.pub to /home/zuul-worker/.ssh/authorized_keys
- Create the working directory: mkdir /home/zuul-worker/src
- Install runc and any other test packages such as yamllint, rpm-build, …
- Authorize network connection from software factory on port 22 and 22022 to 65535
Then register the provider to the nodepool configuration: in the config repository add a new file in /root/config/nodepool/new-runc-provider.yaml:
labels: - name: new-container providers: - name: new-provider driver: runC pools: - name: instance-hostname-or-ip max-servers: instance-core-number labels: - name: new-container username: zuul-worker
Once this config repo change is merged, any job can now use this new-container label.
Use custom container images with the RunC provider¶
By default, the server root filesystem is used for the container rootfs, but you can create and use different rootfs for the containers. To create a new rootfs, do:
- Extract a rootfs, for example from a cloud disk image, e.g. in /srv/centos-6
- Create server ssh keys: chroot /srv/centos-6 /usr/sbin/sshd-keygen
- Create a new user: chroot /srv/centos-6 useradd -m zuul-worker
- Install test packages: chroot /srv/centos-6 yum install -y rpm-build
- Authorize zuul to connect to the new user: copy the /var/lib/zuul/.ssh/id_rsa.pub to /srv/centos-6/home/zuul-worker/.ssh/authorized_keys
Then create a new label in the nodepool configuration using the ‘path’ attribute to set the new rootfs, for example:
labels: - name: centos-6-container providers: - name: new-provider driver: runC pools: - name: instance-hostname-or-ip max-servers: install-core-number labels: - name: centos-6-container username: zuul-worker path: /srv/centos-6
Debug container creation failure¶
If for some reason containers fail to start, here are some tips to investigate the errors:
- Look for failure in logs, e.g.: grep nodepool.driver.runc /var/log/nodepool/launcher.log
- Catch container start failures by running runc manually on the host server:
runc run --bundle /var/lib/nodepool/runc/$nodepool-node-server-id debug-run
- Execute command directly:
runc list runc exec $container-id bash
- Verify the runtime RunC specification config.json file located in the bundle directory
- Check that zuul can connect to the server on ports higher than 22022
List slave instances and their status (used, building …). Use the –detail* option to get the public IP of the instances:
$ nodepool list
Trigger an diskimage build. The image will be automatically uploaded on the provider(s) after a successful build:
$ nodepool image-build *image-name*
Build logs are available in /var/www/nodepool-log/ on the nodepool-builder node but also via https://sftests.com/nodepool-log/.
List nodepool instance images available on the configured providers and their status:
$ nodepool image-list
List instance diskimages built by Disk Image Builder (DIB) and their status:
$ nodepool dib-image-list